Vehicles
Sections
322 not categorized PORSCHE 356 B PARTS ORDERCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 356 1950-59 (includes uncategorized and accessory items) 10050330000 This 9 inch front and 11 inch rear steel fender flare set is made in Germany, we offer a complete line of replacement bodywork to complement the entire Porsche model range. Sold individually. 1 necessary per car. Please note: for conversions, these flares will allow you to run 9 wide tires in the front and 11 wide in the rear. For the 964 / 965 models the torsion bar cut out must be filled. Due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$1,648.90
Make a selection 115000003R01 Support nut for our part # 115114 115115 and 115116 etc. Internal thread: 4.7cm total height of the ring: 2.2cm height of the upper part of the screw ring including the thread: 1.4cm sold individually like new
$1.80
Make a selection 115900991BI Only for cars without pdcc ( active stabilizer ) bilstein b16 (pss10) suspension kits feature ride height adjustability with 10-stage manually adjustable dampers. Simply adjust compression and rebound settings, from comfort to competition, by rotating the setting number knob at the base of the shock. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek. Ride height is adjustable from 1.0 to -1.5 20-40mm (front) & -1.0 to -1.5 20-40mm (rear - minimum 1 lowering). Bilstein b16 (pss10) suspension allows you to enjoy the kind of precise suspension tuning formerly available only on race cars. We recommend purchasi...(choose a part on the right to read more)
$4,153.60
Make a selection 1112P716059 Rennline's rubber grip aluminum pedal covers are the ultimate interior upgrade for any performance automobile. No other pedal on the market gives you the flexibility of adding and removing throttle extensions to fine tune your individual ergonomic preference. Rennline has taken this pedal design to the next level by utilizing rubber grips that can easily be replaced if needed. Each pedal set comes with 8 replacement rubber grips or can be purchased separately at any time. Rennline pedal sets are constructed of anodized aircraft grade aluminum and all stainless-steel hardware. Sold as a set of 4 pedals. Please note: gas pedal heel + toe extensions are sold separately. Please enquire. Order part # 1112 pe7071 fo...(choose a part on the right to read more)
$242.00
Make a selection 100555221HBSCH Is your handbrake boot looking a bit worn and tattered? Replace it with one that is hand crafted in period correct, German sourced, nappa full grain leather. This boot is a one-piece boot that includes the internal plastic handle, it is ideal for those looking for a perfect restoration. Be sure to check our matching shift boots. Please note: this only fits cars with automatic heating (does not include the cut outs for the manual heating control levers). Please indicate the year, model and color code, or give us an ral or pantone color code to go by. Other colors / styles are available upon request. Inquire via our website or with an FVD parts specialist. Sold individually. 1 necessary per car.
$222.23
Make a selection 115900991BI02 This bilstein b16 damptronic active coil over suspension kit features ride height and damping adjustability that is compatible with the Porsche pasm electronic damping system. The damptronic system constantly monitors the road surface via sensors, so the vehicle adjusts for perfect traction, unparalleled control and stable handling. Each active Porsche electronic suspension feature, control and setting is retained and all function in the same manner. The front and rear progressive rate springs are matched with bilstein's famous monotube performance dampers. This suspension is custom tuned for the 991.1 and 991.2 variants. The front and rear threaded damper bodies allow .8 - 1.5 inches (20-40 mm) of travel whic...(choose a part on the right to read more)
$5,197.50
Make a selection 100555216SCC Is your shift boot looking a bit worn and tattered? Replace it with one that is hand crafted in period correct, German sourced, nappa full grain leather. This boot is supple, automotive grade leather that is ideal for a perfect restoration. Be sure to check our matching handbrake boots. Please note: this does not include a shift knob. Please indicate the year, model and color code when ordering. Other colors are available upon request. Inquire with the Porsche color code, ral or pantone color code via our website or with an FVD parts specialist. Sold individually. 1 necessary per car.
$133.10
Make a selection 100211025SSUSA If you have a us model 1980-83 911 SC and are looking to replace your heat exchangers we have some good and bad news. The original heat exchangers (part # 930 211 025 02) are no longer available from Porsche. But, these stainless-steel industries (ssi) heat exchangers will work with modifications. The good news is, once done, you will have more torque and horsepower! Free flow conversion heat exchangers improve sound and performance, while reducing backpressure and thermal load on the motor. These are based off the early style exhausts found on the 1974 2.7 l rs. Those models had a straight through, superior, free flow exhaust design that included a dual inlet muffler. When converting to these heat exchangers y...(choose a part on the right to read more)
$2,863.30
Make a selection 1150009 These are made with club sport events in mind. They work with stiffer springs and lowering springs (we recommend h&r or eibach) and have a fully threaded body for individual lowering like the original 993 cup suspension. You will need to run our drop links for the sway bar, part # FVD333900. Lowering is adjustable to 30 mm (1.18 inches) left or right side fitment. Sold individually. For matching front club sport shocks, please order part # 1150002li for the left and part # 1150002re for the right. For a properly spec'd complete kit including front and rear club sport shocks with lowering springs and rear drop links, please order part # FVD33399300.
$382.80
Make a selection 1150002LI These are made with club sport events in mind. They work with stiffer springs and lowering springs (we recommend h&r or eibach) and have a fully threaded body for individual lowering like the original 993 cup suspension. Lowering is adjustable to 35 mm (1.37 inches) sold individually. For matching club sport shocks, please order part # 1150002re for the right and 2 qty. Part # 1150009 for the rear. For a properly spec'd complete kit including front and rear club sport shocks with lowering springs and rear drop links, please order part # FVD33399300.
$517.00
Make a selection 1002110212DA This is a high-quality replacement for original number, 911 211 021 14 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911101 sold individually. 1 necessary per car. Please note: the corresponding right side i...(choose a part on the right to read more)
$1,603.80
Make a selection 170211013 This steel heat control box is a quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For proper installation, we recommend a new exhaust gasket, part # 91121129700 clamp, part # 90121105122 and connecting piece, part # 91165911900 sold individually. 1 necessary per car.
$140.80
Make a selection 150TBF900 Replace worn-out original front control arm / wishbone bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. This is located at the front of the control arm / wishbone. The correct matching poly-graphite bushing for the rear of the control arm is part # 150tbr900 sold individually. 2 necessary per car.
$48.40
Make a selection 150PB100916 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber, so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's genuine rear sway bars only.
$44.00
Make a selection 129T101854 The rh turbo style Porsche wheel is a classic design perfectly suited for any Porsche model. The center section is cast aluminum and finished in a silver paint. The wheels come with standard rh center cap and accept factory Porsche wheel bolts and center caps. The wheels are offered in 17 and 18 with a variety of offsets to fit narrow and wide body Porsche applications. These wheels are made to order and take between 1-3 weeks to deliver. We recommend ordering a set of rh valves, part # 12945281 when ordering this wheel. Sold individually.
$446.60
Make a selection 150PB1027 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's 911 models from 1978-89 if fitted with an 18mm original rear sway bar.
$49.50
Make a selection 91530224114 High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually.
From $172.54
Make a selection 91455903710PKG At last a factory look center console package with gauges and sending unit and harness almost identical to the factory original nla part. package consists of the factory duplicate reproduction center console, the special heater lever, the reproduction console wiring harness, the plastic heater lever bezel, the factory reproduction clock, volt meter, and temperature gauge, the temperature gauge sending unit, the sending unit plate and the sending unit o ring. Everything you need to install this beautiful assembly into your car and update it to the appearance group package offered originally when the car was new. This item is made to order and will take 4-6 weeks.
$795.00
Make a selection 91163192700EQ High-quality automotive lighting (al) OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Lenses are prone to oxidation and stone chips with time, they become unsightly and can detract from safety. We also recommend installing the new lens with a new gasket, part # 91163196700. Sold individually. Driver's or passenger's side fitment. 2 necessary per car.
$52.80
Make a selection 150PB100922 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber, so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's genuine rear sway bars only.
$44.00
Make a selection 115974 (2) model 928: parts of the suspension must be changed depending on manufacture date.
$517.00
Make a selection 21011196402 Say good bye to the days of having to weld and cut aftermarket sport cats to make them fit! We have our sport cats made in Germany to our specifications and that means that these are 100% bolt on without issue! - + 10 crank hp & +6 crank torque. - 200 cell, tri metallic German hjs sport catalysts. - large volume o 105 mm (4.1 inch diameter) high flow cat. - exhaust hanger brackets are included so that the heat shield does not have to be removed. - weighs 7.2 lbs. (3,2 kg). - direct bolt on replacement. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress. - made in Germany. - more distinguished flat 6 growl at wide open throttle. The FVD 200 cell...(choose a part on the right to read more)
$1,593.90
Make a selection 190731902 Convert your current electrical mirrors to the factory aero mirror look available after the 1992 models. These parts are not factory reproductions, they are original parts. Quality is 100% factory.
$1,754.18
Make a selection 190111043B For use on obd1 (94 and earlier) cars only! Only 1 o2 bung is provided. Call for 1995 application. Will not work with multiple o2 sensor cars, like north american cars. (96-98) does not include a TUV-certificate. We recommend using our catalytic installation kit, part # FVDmk993300b please note: not legal for use on california pollution controlled motor vehicles.
$556.60
Make a selection 17021102103 This is a high-quality replacement heat exchanger manufactured by dansk. It is manufactured in steel and includes a corrosion resistant protective coating. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk930100 sold individually. Right or left side fitment. 2 necessary per car.
$837.10
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |